Lighting cove CL188 ‘Compact’ is a minimalist but elegantly beautiful uplighter that will be sure to grace your room.
CL188 – ‘Compact’
Using Correct Adhesives for the CL188 ‘Compact’ Uplighting coving – IMPORTANT!
It is essential to use Decofix Extra – available in 310ml cartridge FX200 or 80ml tube FX210 – when joining two sections together (either corners or on a straight run). This is a high strength ‘superglue’ that welds the pieces together and guarantees against cracks appearing in future years. The bonded join will actually become stronger than the material itself.
For mounting the coving, we strongly recommend using MS-Polymer Decofix Power FDP700 (dries white and paintable) – especially if any wall or ceiling mounting point has been plastered/skimmed within the last 3 months, or the ambient temperature when fixing is less than 10 degrees Celcius.
We suggest that silver foil is fitted around the side and base of the LED’s to prevent any light spill
For any areas that require filling, we recommend Toupret (available elsewhere).
Date & Time: Most items are kept in stock and despatched by a national courier to normally arrive within 2-3 working days. The delivery will usually be between 8:00 am and 6:00 pm, Monday-Friday. Advance tracking info for orders placed online will be provided by email once goods have left our central warehouse. Please note courier drivers do NOT phone ahead with an ETA so any preferred delivery date or alternative instructions should be advised in the checkout box.
Cost: Delivery is charged at a flat rate of £20 + VAT for all orders in the UK except the Channel Islands
Damages: Although it is extremely rare for damage to occur during transit, please remember that a consignment must not be signed for if there is evidence of any significant damage. Check the contents of your package and report any damage to us within 48 hours so we can arrange for replacements to be sent. An emailed photo of the damage must be provided before we re-send. Minor transit damage such as a very small dent or scratch and which is easily repairable is not regarded as sufficient for replacement.
All our products are manufactured in a hardened polyurethane - a more modern and superior material compared to traditional plaster coving, allowing for a much quicker, cleaner and easier installation. They are pre-primed ready for the finish paint and suitable for installation by anyone with basic DIY skills.