Slow drying, strong, installation adhesive and filler. Water based, so easy to wipe off excess.  One cartridge sufficient for approx 6-7m coving/skirting.  Fits in standard caulking gun (FDP100).  NOTE: if fitting coving to new lime based plastered walls/ceilings, we recommend using FDP700 Hydro silicon adhesive below.  For joins, use Extrafix FX210/FX200.

When installing in cold weather, ensure operating/room temperature >10 celcius for good adhesion. 

Quantity

As FDP500 cartridge above, but 4.2 litre tub (6.4kg) - covers approx 70m of coving/skirting.

Ensure operating temperature >10c when installing in cold conditions

Quantity

External grade (silicon based) mounting adhesive.  Use for all products installed in humid areas (shower/wet rooms or outside applications). 290ml cartridge - covers approx 6-7m coving.  Fits in standard caulking gun (FDP100).  Also use when interior ceilings have been recently plastered using a lime base.

Quantity

80ml tube of specialist jointing adhesive - sufficient for approx 40m of coving.  It is strongly recommended that this is used for joining all coving, cornice, skirting and panel mouldings - gives an unbreakable bond between sections to prevent any future unsightly cracking or pulling apart of sections. 

Quantity

As FX210 above, but sufficient for approx 150m of coving/skirting.  It is strongly recommended that this is used for joining all coving, cornice, skirting and panel mouldings - gives an unbreakable bond between sections to prevent any future unsightly cracking or pulling apart of sections.  Fits in standard caulking gun (FDP100)

Quantity